Lioduras™ MOL7000 series — UV Curable Hard Coating Agents for Molding

Features

  • Hard coatings to achieve both Moldability(Elasticity) and scratch resistance.
  • UV irradiation is not required after molding.
  • Excellent chemical resistance for automobile interior decorative film.

Product CatalogPDF: 663.2KB

Technical Information

Coating Properties

Evaluation method MOL7200 MOL7000 MOL7100
Haze JIS K 7105 < 1.0% < 1.0% < 1.0%
Total light transmittance JIS K 7105 > 90% > 90% > 90%
Scratch resistance Steel wool #0000
(200g/cm2, 10 round)
Δhaze %
< 1.0% < 3.0% < 5.0%
Pencil hardness JIS K 5600-5-4 F F F
Degree of elongation 140°C 70~80% 100~120% 160~180%
Newtrogena
(Sun screen)
60°C - 4hrs No change No change Slightly trace
80°C - 4hrs No change Slightly trace Slightly whitening

The above data are the measured value but not our guaranteed performance.

Preparing conditions of samples for evaluation

Substrate PC film (PC/PMMA film only when evaluating pencil hardness)
Coating conditions Using bar coater
Thickness 5 - 6μm
Dry conditions 80°C, 1min.
Curing conditions High Pressure Mercury Lamp 80W/cm, Amount of lamp 400mJ/cm2
Adobe Reader is required to see the PDF data.

Adobe Readeris required to see the PDF data.

Inquiries

Electronics Division
Toyochem Co., Ltd.
TEL : +81-3-3272-0905