Thin heat-resistant double-sided tapes series

The three products "R260", "R310KS-2", and "R380" are double-sided adhesive tapes with a thin film design and excellent heat resistance. Each product is designed to have a thickness of 50μm or less, and can be used in various applications that require downsizing of the entire product and heat resistance.

• Characteristics 
• Product Data
• Notes in Use
• Points to Note When Storing
• Featured Products

Characteristics 

・R260
R260 is double-sided tape which high bonding performance pressure sensitive adhesives is coated on the special thin core material. It has excellent bonding performance on various plastics, synthetic rubbers, metals, etc.

・R310KS-2
It performs stable quality in wide temperature ambient. With a suitable material designing for processability, it enable to reduce stringiness, glue returning and glue flying in process. It can be applicable as a fixing tape for FPC, electronic parts, etc.

・R380 Series
This is a coreless tape and two types of thickness of 30μm and 50μm are developed. This adhesive tape has excellent heat resistance and maintains its adhesion even in high-temperature environments, with little deviation in holding power. It is suitable to bond heat-source and heat dissipating parts and can contribute to the miniaturization of products.

Product Data

• The above values are measured values and are not guaranteed values.
• Please contact our representative regarding your desired tape width and length.

Notes in Use

1. Clean the adherend (Remove dust, any other foreign particles, water, and oil.)
2. Make sure that the adherend is free of burrs and warpage.
3. Apply the tape to the adherend at a temperature of around 20 degrees centigrade wherever possible.
4. After applying the tape, press firmly.
5. Be sure to conduct a test before using the tape to check that the tape is suited for the application.

• These tapes are for industrial use only. Do not use them for the following applications.
  ･Applications that involve or may involve the direct attachment of the tape to the skin.
  ･Applications that involve the direct attachment of the tape to food.

Notes on strage

1. Store the product in a room away from sunlight. Keep it away from high temperatures and humidity. (The desirable temperature is 5 to 40 degrees centigrade, and the desirable humidity is 60% or lower.)
2. Avoid placing the product directly on the ground or floor. Place it on a table that allows air to pass through.
3. When storing tapes in a stack, be sure to insert a removable material, such as inserting paper, between the tapes and stack them vertically.

Featured Products

Environmentally friendly low VOC double-sided tapes R255

This is an environmentally friendly, toluene and formaldehyde free, double-sided tapes that removes toluene and formaldehyde from the raw materials

Thin heat-resistant double-sided tapes series

A lineup of thin film tapes with excellent heat resistance. Each adhesive tape is designed to have a thickness of 50μm or less, and can be used for various applications that require miniaturization of the entire product and heat resistance.

Heat-resistant slightly adhesive film LIOELM™ LE950 Series

A heat-resistant single-sided adhesive tapes with low-contamination and slightly sticky acrylic pressure sensitive adhesives. Can be used as a carrier tape for FPC, electronic components, etc.

Base material joining tape (Splice tape)

DF4000 series/LE831P series: Tape for splicing substrates during printing/film processing. We offer a lineup of products with features such as good adhesion in low-temperature environments, suitability for high-speed processing, and high heat resistance.

Anti-tracking tape

This is an insulating tape for next-generation EVs that has both heat resistance (RTI 180℃) and tracking resistance (1000V). It can be used for insulating the housings of EV parts such as transformers/reactors, inverters/junction boxes, etc.

Removable protective film LIOELM™ LE501

A protective film with excellent transparency, reworkability, and air release properties. Can be used as surface protection for touch panel products, process protection, etc.